Compatible With:
- Mojo HDR
- Mojo HD 3 - 5
- Mojo 3 - 4
- Ripley 4
- Ripley V4S
- Ripley AF
- Ripmo 1 - 2
- Ripmo V2S
- Ripmo AF
Specs:
Adapter thickness is 2.5mm; when accounting for BB spacing on the drive side
GXP Sram 68= 2.5mm spacer DriveSide and 2.5mm on NonDrive side
GXP Sram 73= No spacer - just cups to frame
Dub Sram 68=2.5mm DS / 2.5mm ND NOTE: There is a 4.5mm spacer required that goes between DS crank and outside of BB cup.
Dub Sram 73= NO SPACERS under bb cups, 4.5mm spacer between DS crank and outside of BB cup *If using the ISCG adapter then the IBIS will need to get you a 2mm spacer to replace the 4.5mm spacer
Shimano 11 & 12 speed 68= 5mm DS / 2.5mm ND
Shimano 11 & 12 speed 73= 2.5mm DS / none ND
RaceFace NextR 12S 68= 3.75mm DS / 2.5mm ND
RaceFace NextR 12S 73= 1.25mm DS / none ND
If you want to mount a chain guide on your Ibis, you will need one of these.
When using SRAM DUB cranks along with the ISCG plate on a RipMo or any frame with a 73mm bottom bracket shell width, you will need the SRAM DUB 2mm spacer inside the drive side crank arm against the bottom bracket shell.